Karlnet
[Top] [All Lists]

Re: [Karlnet] Full Duplex KarlNet

To: <karlnet@wispnotes.com>
Subject: Re: [Karlnet] Full Duplex KarlNet
From: "Terry Bomersbach" <terryb@the-cia.net>
Reply-to: karlnet@WISPNotes.com
Date: Wed, 8 May 2002 23:25:13 -0500
List-post: <mailto:karlnet@WISPNotes.com>
I think you missed the picture here.  If you try to download something
assuming full duplex, it's still only going to be able to download the file
at the maximum speed of a single pipe and no more.  There isn't any way for
it to download at the speed of both pipes for a combined d/l speed of
22mbits.

-----Original Message-----
From: Paul C. Diem <PCDiem@FoxValley.net>
To: karlnet@WISPNotes.com <karlnet@WISPNotes.com>
Date: Wednesday, May 08, 2002 10:20 PM
Subject: Re: [Karlnet] Full Duplex KarlNet


>Exactly, which makes it full duplex since it does not have to share the
>pipe between sending and receiving. The question is, why is the throughput
>worse?
>
>Paul C. Diem
>PCDiem@FoxValley.net
>
>On Wed, 8 May 2002, Terry Bomersbach wrote:
>
>> This might be considered full duplex of sorts but it sounds more like
load
>> balancing.  Take outbound traffic on one pipe, inbound on the other pipe.
>>
>> It's not actually sending data out on both pipes, only sending responses
out
>> on one pipe and receiving information on the other.
>>
>> -----Original Message-----
>> From: Paul C. Diem <PCDiem@foxvalley.net>
>> To: karlnet@WISPNotes.com <karlnet@WISPNotes.com>
>> Date: Wednesday, May 08, 2002 3:23 PM
>> Subject: [Karlnet] Full Duplex KarlNet
>>
>>
>> >Has anyone ever configured an AP-1000 with KarlNet ISP Base to do full
>> >duplex? According to the online help, you can set a backup interface and
>> >check the Perm checkbox. This will make it send data over the backup
>> >interface and receive data over the primary interface effectively making
a
>> >full duplex link.
>> >
>> >I've tried setting it up this way on the base end (interface 2 is
primary
>> >on channel 1 and interface 3 is backup on channel 11) and the exact
>> >opposite (interface 2 is backup on channel 1 and interface 3 is primary
on
>> >channel 11). The ping fill test drops from about 7mbps to 2.5mbps.
>> >
>> >Is there something I'm missing?
>> >
>> >Paul C. Diem
>> >PCDiem@FoxValley.net
>> >
>> >_______________________________________________
>> >Karlnet mailing list
>> >Karlnet@WISPNotes.com
>> >http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>_______________________________________________
>Karlnet mailing list
>Karlnet@WISPNotes.com
>http://lists.wispnotes.com/mailman/listinfo/karlnet
>


<Prev in Thread] Current Thread [Next in Thread>