Karlnet
[Top] [All Lists]

RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards

To: <karlnet@wispnotes.com>
Subject: RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards
From: "Wireless Guy" <wirelessguy@natronics.net>
Reply-to: karlnet@WISPNotes.com
Date: Tue, 18 Jun 2002 00:08:09 -0500
List-post: <mailto:karlnet@WISPNotes.com>
Thats the first I have heard that...
So it is Karlnets fault I guess.... ;-)
I am building another flashrom unit tomorrow.. I will test your theory
then.... I kinda doubt it will pass the 10 reboot test even with just 1
radio in it though...
And I dont mean anything bad about Demarc Tech either.. Just these goofy
cards..

Thanks for the heads up Tony.

Nate

-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
Behalf Of Tony
Sent: Monday, June 17, 2002 11:12 PM
To: karlnet@WISPNotes.com
Subject: RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards


Nate

To be fair the Prism 2.0 cards do work in the flashrom units but from
what we have seen only one can be installed at a time, this is a problem
with the TC code and not the cards.

Sincerely
Tony Morella
Demarc Technology Group
Office: 908-996-7995
Cell: 908-246-9170
Fax: 908-847-0202
email: tony@demarctech.com
http://www.demarctech.com
Wireless Solution Provider


-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On Behalf Of Wireless Guy
Sent: Monday, June 17, 2002 11:29 PM
To: karlnet@WISPNotes.com
Subject: RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards


I was told they would work with the flashrom units but I have yet to get
one to work with multiple flashrom units.. I have about 17 flashrom
units out in the field and I tried the 100mW radios in just about all of
them.. I even tried different hardware with the flashroms to see if that
would make a difference and they still didnt work. So we have $1500 in
cards laying around not doing anything... Anyone want to buy them
cheap??? Maybe we should get some super glue and make an ashtray with
them.... ;-)

Nate


-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
Behalf Of Bill Fisher
Sent: Monday, June 17, 2002 10:04 PM
To: karlnet@WISPNotes.com
Subject: RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards



Tony,

How do I swap out or upgrade these Prism 2.0 cards you sold me?  Your
statement seems to indicate that they are worthless with Karlnet.
Maybe I
don't understand.  Regardless, I'm having to climb towers now to take
them out.

Bill

_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet


_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet

_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet



<Prev in Thread] Current Thread [Next in Thread>