Karlnet
[Top] [All Lists]

Re: [Karlnet] Having random outages, Karlnet AP1000, RG Clients -Help

To: "Karlnet Mailing List" <karlnet@wispnotes.com>
Subject: Re: [Karlnet] Having random outages, Karlnet AP1000, RG Clients -Help
From: "Brett Hays" <bretth@htonline.net>
Reply-to: Brett Hays <bretth@htonline.net>, Karlnet Mailing List<karlnet@WISPNotes.com>
Date: Mon, 5 May 2003 10:40:02 -0500
List-post: <mailto:karlnet@WISPNotes.com>
Nate,

    I received several other messages similar to yours off list.  I am
hoping Charles, Kevin or some of the experts can give us an idea of what is
going on..

Brett

----- Original Message ----- 
From: "Nate McLain" <nate@ctrail.net>
To: "Brett Hays" <bretth@htonline.net>; "Karlnet Mailing List"
<karlnet@WISPNotes.com>
Sent: Sunday, May 04, 2003 5:37 PM
Subject: RE: [Karlnet] Having random outages, Karlnet AP1000, RG
Clients -Help


> I see this same problem on a flashrom unit I have that has 3 sectors. I
> monitor a client on each sector and I have the EXACT same problem. My
outage
> is NEVER on all 3 sectors at once. And it happens on no given pattern as
> well. I have wondered about this in the past and also asked about it on
the
> list. If anyone has any suggestions I would love to hear them!!
>
> Nate
>
> -----Original Message-----
> From: karlnet-bounces@WISPNotes.com
> [mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Brett Hays
> Sent: Sunday, May 04, 2003 2:48 PM
> To: Karlnet Mailing List
> Cc: cwu@cwlab.com; sjgreen@htonline.net; isp-wireless@isp-wireless.com;
> kstuckwisch@htonline.net
> Subject: [Karlnet] Having random outages, Karlnet AP1000, RG Clients -
> Help
>
>
> I am hoping someone on the list with more experience than me can tell me
> what may be going on here or has had a similar problem and solved it.
>
> 4.31 Karlnet on AP1000, amped omni
>
> 21 RG1100 clients (all on 4.31)
>
> At random times and never lasting more than 10 minutes or so, from 4 to 7
of
> the clients will be down.  The clients that go down share nothing in
common
> as far as geography or signal strength, etc.  In terms of signal, some of
> the best and some of the worst are involved...In terms of geography, I
have
> two clients with identical hardware on either side of the same street, the
> one closer to the tower is always involved in this problem and the one a
> block farther away never is.
>
> When I check the interface monitor on the AP1000 when this is happening,
FCS
> errors seem high.  In 60,000 frames the last time, there were 7500 FCS
> errors.
>
> Can anyone suggest any possibilities?  Could it be interference closer in
to
> the tower?  If so, and it is strong enough to knock out the clients it
does
> with very strong signals why aren't all effected?
>
> I really appreciate any suggestions or help.
>
> Brett Hays
> Hometown Online
> www.htonline.net
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>

<Prev in Thread] Current Thread [Next in Thread>