RFI
[Top] [All Lists]

Re: [RFI] w7ekb & ground rods

To: rfi@contesting.com
Subject: Re: [RFI] w7ekb & ground rods
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Thu, 15 Jan 2015 15:22:51 -0800
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
On Thu,1/15/2015 1:45 PM, EDWARDS, EDDIE J wrote:
Couple more good references for grounding and bonding standards from Motorola & 
Harris:

Remember that these "good practice" methods are tailored to VHF/UHF, with antennas bonded to the tower, coax (or hard line) bonded to the tower top and bottom, for well-laid out power and antenna entrances, and mostly for new construction. That's a bit different from our typical HF installations, in existing homes and apartments, and power and antennas often entering at widely separated points.

73, Jim K9YC
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>