Hi Rudy,
Here is my Pro III setup:
250hz filter on
Twin Peak Filter
use the RF gain like you decribed below
And/Or use the ATT set around 12 dB.
Last contest I played with MMTTY's decoder. IIR and PLL seem to work the
best for me, but the PLL was better over all in the last contest.
I take my audio out of the back DIN plus and into the line level of the
sound card. No external DSP boxes used at my location now. I wonder how
other Pro III guys are doing with or without external DSP boxes?
Don has a great article on the Pro III on his web site.
http://www.rttycontesting.com/icom756proiii/icom_ic756proiii_index.htm
http://www.rttycontesting.com/icom756proiii/icom_ic756proiii_index.htm
73 de w5jay/jay..
----- Original Message -----
From: "Rudy Bakalov" <r_bakalov@yahoo.com>
To: <rtty@contesting.com>
Sent: Thursday, February 15, 2007 4:38 PM
Subject: [RTTY] Improving receiving performance
> This past WPX was my first real attempt to compete on RTTY and based on
> the experience I have some questions for the experts:
>
> 1. For those of you with an Icom 7566P3s, how do you set up your receiver
> for optimum performance? I did use the TBF and lowered the RF gain down
> to about S9+5.
>
> 2. How do you configure the MMTTY decoder for maximum performance? I
> have a new dual core computer that can do a lot of number crunching.
>
> 3. Do you use any external DSP filters between the radio and the
> computer?
>
> Thanks,
>
> Rudy N2WQ
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.441 / Virus Database: 268.18.0/689 - Release Date: 2/15/2007
> 5:40 PM
>
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|