In the next RTTY contest, 14.090 is going to be 'MY' frequency.
I don't want anyone trespassing there as I am now laying claim. If you
happen to tune there and don't hear anything, it is because I am taking
a break and am going to be back in a few minutes, or maybe I have my
beam turned away from your direction. But it is 'MY' frequency.
On 40, 7040 will be 'MY' frequency. Just hope some of those QRP CW guys
don't try and jump my claim. Can't believe CW Ops would dare to operate
on 40 meter CW during a RTTY contest. They have no manners. 73
Tom W7WHY
As long as you can lay claim to a frequency, I'm claiming mine.
On 1/5/2015 8:07 AM, joeduerbusch wrote:
We have been fighting this dead horse for the 40 years I been on rtty.
When there is a contest, any contest, someone on some frequency is going to
complain.
Ask the SSTV guys about what happens to them on a SSB contest.
It isn't going to change.
Joe K0BX
On Mon, Jan 5, 2015 at 3:43 PM, Joe Subich, W4TV <lists@subich.com> wrote:
If a RTTY user is on a frequency you want to use
then QSY or wait until its clear
It isn't a matter of JT65/JT9 operators waiting on the RTTY op -
just the other way around. The RTTY operators *DO NOT LISTEN*
for the other modes - which have a 48 second transmit/72 second
receive cycle. The RTTY contesters fire up *on top of* existing
QSOs - typically during the 72 second time when one station is
listening for the other.
RTTY contest participants need to be taught about the characteristics
of other data signals and avoid those narrow centers of activity rather
than simply hit F1 on any frequency that shows no activity in the last
100 milliseconds.
73,
... Joe, W4TV
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|