[Top] [All Lists]

Re: [RTTY] N1MM Logger+ RTTY macro question

To: "rtty@contesting.com" <rtty@contesting.com>
Subject: Re: [RTTY] N1MM Logger+ RTTY macro question
From: Richard Ferch <ve3iay@storm.ca>
Date: Mon, 4 Jan 2016 17:33:16 -0500
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
Dick, Salvo has hit the nail on the head. You need to look at both F5 and F2 messages.

When you are using ESM, pressing Enter to send the exchange while you are running sends both F5 and F2. You can do as Salvo suggests and leave F5 empty and put everything into F2, or you can do what I do:

F2 Run Exch,{TX}{SENTRST} {EXCH} {EXCH} ! {RX}
F5 His Call,{TX}{ENTER} !{RX}

Either way will start the received exchange on a new line, starting with his call sign once followed by the rest of the exchange. The difference only shows up when you want to send the message again for some reason (pressing F2 vs. the = key gives a choice of two different behaviours in my version, whereas they are both the same in Salvo's).

Rich VE3KI

K9OM wrote:

Please advise if there is a way for me to edit
the F2  "run" macro so the other stations Call is only sent once after
jumping to  the next blank line?

RTTY mailing list

<Prev in Thread] Current Thread [Next in Thread>