RTTY
[Top] [All Lists]

Re: [RTTY] Information please

To: Richard White <whiter26@xxxxxxxxxxxxx>, "RTTY, Contesting" <rtty@xxxxxxxxxxxxxx>
Subject: Re: [RTTY] Information please
From: Martin Berube <ve2nmb@xxxxxxxxx>
Date: Fri, 26 May 2017 11:15:38 -0400
List-post: <mailto:rtty@contesting.com>
Hi Richard,

I am contesting in RTTY with a AL-811H.  It does the job.   with 15W from
the rig, I get around 350W depending of the band.

This site contains userful information about there amps.

https://www.w8ji.com/al811h_schematic.htm

-- 
73,  Martin
VA2PX,VE2NMB


2017-05-25 21:42 GMT-04:00 Richard White <whiter26@xxxxxxxxxxxxx>:

> I am working RTTY about 90% of the time now as I can't copy  CW as I once
> did.  With propagation as bad as it is I am considering buying an amp. Have
> not had one for over 15 years. On RTTY I can copy many calls but they can't
> copy my 75 watt signal on my 4 element beam and that is frustrating.
>
> With a limited budget I am considering a AL-811H or the AL-811.  I would
> like to know how either rig works with RTTY. Also how much  output power
> from the rig do they need to get 200 or 300 watts from the amp.  Also, the
> Ameritron  video on the 811H shows using an interface to protect the radio.
> Is this really necessary?
>
>
>
> Replies appreciated....   Dick   KS0M
>
>
>
> Richard C. "Dick" White
>
> Fulton, MO 65251 U.S.A
>
> Amateur Radio Station  KS0M
>
>
>
> _______________________________________________
> RTTY mailing list
> RTTY@xxxxxxxxxxxxxx
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@xxxxxxxxxxxxxx
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>