Jim,
Turn off the 'Save to Floppy' in the LOGCFG.DAT file.
Add a Semicolon ";" to the following lines,
; FLOPPY FILE SAVE NAME=
; FLOPPY FILE SAVE FREQUENCY=
Then 'RESCORE', on my 486 Laptop, it takes about 5-minutes to do 1400
entries.
Ray - WA6OWM
----- Original Message -----
From: "Jim George" <n3bb@mindspring.com>
To: "TRlog reflector" <trlog@contesting.com>
Sent: Wednesday, July 14, 2004 4:58 AM
Subject: [Trlog] Rescore Command
> The need to do the "RESCORE" capability of TR is pretty lame! I went thru
> the procedure per K5TR's email. It worked OK, and the "rate" at 99 WPM
etc
> was about 1100 QSO/hour. At that rate it was going to take over an hour
> and a half with my 1800+ QSO log. The little 486DX DOS SO2R PC was
writing
> furiously to its disk drive, etc. I gave it up after about 20% of the way
> thru and said to myself "this isn't worth it." and sent in the Cabrillo
> file for "god to sort it out." I love TR. It's the greatest for
> SO2R. But things like this are not satisfactory at all.
>
>
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
>
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|