I also see the 'don't use' the user1 and user2 functions as a problem that
needs to be addressed. John, thanks again for the info...
73 Jeff kb2m
----- Original Message -----
From: "John T. Fleming" <W3GQJ@comcast.net>
To: <tentec@contesting.com>
Sent: Tuesday, October 14, 2003 8:43 AM
Subject: RE: [TenTec] MAJOR dead Orion problem with update
Jeff,
After having the problem, I have not used the user1, etc. to restore
previous settings with software upgrades. I also have the extra filters and
the auto-tuner. I need to turn them back on and center the filters as well
as turn on the internal keyer. I am waiting on new information from Ten-Tec
on how best to handle these functions. I have gotten proficient on
reloading the stack memories. I had used memory 51 to 55 for the 60 meter
band, but since I like to "play," I will wait for a while before I reload
them again. I normally keep my radio roll off and width set to the
parameters needed for the 60 meter band except for power level. I hope they
do find the best method to use the user function. I am waiting for a new
tower and tri-band beam to arrive. I want to use one user for the PSK31
settings, etc.
73,
John
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|