Rick Williams wrote:
> I no longer own an Omni V.9 BUT I remember that it would sometimes go weird
> (e.g. when I replaced the battery). I assume you've done the normal rig
> rest as described in the Omni V manual. When a normal reset is not
> sufficient, hold the CLR/CLK key with the power off and then turn the power
> on.
>
> It may not solve your problem but it's worth a shot. Of course reseating
> all the connectors and tightening the grounding screws on all the boards is
> also a worthwhile effort if you have the covers off.
>
> Good luck.
>
> 73,
>
> Rick
> VE7TK
>
> Many thanks for your comments.
I tried the power + CLR/CLK reset, but it didn't do the trick.
I'll be taking the lid off the rig in due course and I'll do the
necessary with the screwdriver, etc.
73
Bob
MM0RKT
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|