Stuart Rohre wrote:
> Bob,
> If you can identify and access the diodes, you should be able to check them
> with any DMM having the diode check function. It will show 600 mv for a
> good diode, and 0 for a bad. Try the polarity of test leads both ways on
> the diode leads before you say one is open.
>
> -Stuart
> K5KVH
>
>
> Thanks, Stuart.
The big problem is accessing the diodes! Rick, VE7TK, sent me a link to
his website and the instructions on how to do the disassembly and I'm
beginning to have second thoughts about taking it apart.
It may be the finals and I don't have gear to test them, so I can see it
going back to TenTec UK for the repair.....
73
Bob
MM0RKT
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|