TenTec
[Top] [All Lists]

Re: [TenTec] O II and headphones?

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] O II and headphones?
From: "Bob McGraw - K4TAX" <RMcGraw@Blomand.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 5 Sep 2007 00:09:00 -0500
List-post: <mailto:tentec@contesting.com>
I use a pair of Radio Shack cans.  The big ones with full ear coverage and 
soft cushions.  Audio is at about 35% for comfortable listening level.  I 
suspect your phones are high impedance otherwise above 16 ohms at which the 
headphone volume will be reduced.  Typically the headphone impedance should 
be 8 to 16 ohms.

73
Bob, K4TAX


----- Original Message ----- 
From: "TMorton" <tangotom@fastmail.net>
To: <tentec@contesting.com>
Sent: Tuesday, September 04, 2007 7:53 AM
Subject: [TenTec] O II and headphones?


>I have a  Heil Noise Canceling Headset. Whenever I plug in the headphones, 
>the volumne dramatically drops and requires that I really  'crank' the 
>volume up. Of course, when I pull out the plug, I get blasted by the 
>speaker. Is this a known issue or  do I have an "unique issue' to be 
>addressed with TenTec?
> Tnx
> Tom
> CX7TT
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>