TenTec
[Top] [All Lists]

Re: [TenTec] [Fwd: Line Isolator Balun (sorta) question.]

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] [Fwd: Line Isolator Balun (sorta) question.]
From: Richards <jruing@ameritech.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 08 Aug 2010 21:50:42 -0400
List-post: <mailto:tentec@contesting.com>
I TRULY APPRECIATE ALL THE HELPFUL COMMENTARY POSTED IN
REPLY TO MY QUESTION.

Reflecting on all this, it now seems ironic the Aug. 2010 QST magazine article recommending ferrite beads as an ersatz isolation transformer cites K9YC - Jim Brown's white paper, "A Ham's Guide to RFI, Ferrites, Baluns, and Audio Interfacing," as a major research source.

Having read the QST piece one might think a choke made with ferrite beads was essentially de riggeure... quite a contrast from the conclusion one might reach reading Jim's white paper. Considering that, and all the near consensus demonstrated herein, one would wonder what all the fuss is about.

This ham radio thing is truly an enigma... so many differing views, based on what is purported to be "science." The hardest thing I do as a relatively new ham is determine which is fact and which is fiction.

Thanks again for all the input.  Good thread.

============================ James - K8JHR  =====================


The primary benefits on a TX antenna are reduced RF in the shack, and in
your (and your neighbor's) living room.  A string of beads IS enough to
prevent pattern distortion.


===================================================================

<Prev in Thread] Current Thread [Next in Thread>