Thanks for confirming what I've tried. I think I'd better go
back and check that 8 pin connector pin-out again. For
this old guys hands and eyes, I wish they had stayed with
the 4 pin connector :>)
The mini-din on the back caused me much grief. It wanted
to melt - wonder if it came from radioshack!
And yes, I was told that the headset mike I was using
on the OMNI 6+ sounded as good as the TT desk mike with
the same kind of element. Ear piece quality is a consideration.
73,
John, K4AVX
Message: 3
Date: Sun, 24 Aug 2014 16:23:44 -0400
From: Richards<jrichards@k8jhr.com>
To: Discussion of Ten-Tec Equipment<tentec@contesting.com>
Subject: Re: [TenTec] MIKE & Eagle
Message-ID:<53FA49D0.1040205@k8jhr.com>
Content-Type: text/plain; charset=windows-1252; format=flowed
John --
My test for mic quality is to make a recording on the computer using a
low sampling rate, maybe 11.5 Hz - and if it sounds OK, then it should
sound OK on the air. If not, try another model.
Message: 4
Date: Sun, 24 Aug 2014 14:16:24 -0700
From: Jim Brown<k9yc@audiosystemsgroup.com>
To:tentec@contesting.com
Subject: Re: [TenTec] MIKE & Eagle
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|