Paul, when you release the PTT and the green line drops, how long does it
take for the receiver to recover?
73 - Rick, DJ0IP
(Nr. Frankfurt, Germany)
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Paul
Christensen
Sent: Monday, December 07, 2015 2:38 PM
To: 'Discussion of Ten-Tec Equipment'
Subject: Re: [TenTec] TenTec Digest, Vol 156, Issue 4
> Sorry Barry, latency measured on the Anan does not necessarily apply
> to
the FLEX 6000.
I made timing and latency measurements of my Flex 6700 using an Agilent
4-channel DSO. I captured the data and uploaded the DSO graphic images.
Keep an eye on the PTT trace from the external keyer as the timing
reference. QSK performance has improved further since the date of these
measurements. QSK performance is at least as good as the K3 and the many
Ten Tecs I've owned. It is fast. At 40+ wpm, I don't feel like I'm
dragging characters behind me due to any latency, and there are no headphone
audio thumps or clicks in CW T/R transitions.
https://community.flexradio.com/flexradio/topics/flex_6700_cw_keying_v_elecr
aft_k3
Paul, W9AC
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|