TenTec
[Top] [All Lists]

Re: [TenTec] Pimp My Eagle

To: denton sprague <tentec@contesting.com>, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Pimp My Eagle
From: Tony <va3dwi@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 07 Jan 2016 12:22:03 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I hope you are joking about that!!  
73, Tony VE3DWI.

Sent from my BlackBerry 10 smartphone on the Bell network.
  Original Message  
From: denton sprague
Sent: Thursday, January 7, 2016 12:13
To: Discussion of Ten-Tec Equipment
Reply To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Pimp My Eagle

A built in antenna analyzer also, please...

> On Jan 7, 2016, at 8:52 AM, rick@dj0ip.de <Rick@DJ0IP.de> wrote:
> 
> PLEASE KEEP THIS THREAD FOCUSED ON THE “EAGLE.”
> 
> (feel free to start a new thread on O7+ or O3)
> 
> 
> 
> I agree with Brian . . . let’s talk about radios again.
> 
> 
> 
> It seems the current tentative plan is:
> 
> 
> 
> 1) OM7(+) gets a new front plate and face plate, but not a lot of
> changes
> 
> 2) (super) Eagle gets new DSP and _ _ _ _ _ _
> 
> 3) Argonaut 6 will more or less resume production unchanged
> 
> 4) An O3 is in the making, details unknown
> 
> 
> 
> I want to make a suggestions about the future Eagle.
> 
> 
> 
> IMO TEN-TEC made a mistake with the Eagle.
> 
> They tried to address three market segments with one product.
> 
> 1) A simple easy to use computer for old folks (including me) who
> usually prefer not to even turn the computer on, just because we want to get
> on the radio – but do want high performance.
> 
> 2) The mobile hf market
> 
> 3) The entry level 100w hf transceiver market
> 
> 
> 
> Result: Jack of all trades, master of none.
> 
> 
> 
> If you read the wish list in the Eagle group, since the beginning there were
> clearly representatives of all three groups expressing wishes for
> improvements. What might benefit one group is often counter-productive for
> the other.
> 
> 
> 
> If Ten-Tec is to succeed, they need to identify the market segment for each
> product and optimize for it.
> 
> 
> 
> Of the three segments I have listed above, I believe Ten-Tec’s best chance
> is in no. 1.
> 
> 
> 
> I don’t think any US based OEM can go big in the entry level segment because
> it is primarily driven by price.
> 
> 
> 
> I also believe a mobile rig today MUST have a removable front panel. Sure
> some people don’t mind having the radio occupy the front passenger space,
> but I prefer to keep it for my XYL. (In fact I have no choice ;-)
> 
> 
> 
> My wish is for the Super Eagle to focus on number 1 above.
> 
> As such, I can propose some changes:
> 
> 
> 
> 1) And most important: a bigger box. In all my 15+ years
> participating in Ten-Tec groups, I can’t recall a single instance of anyone
> asking for a smaller box. Yet ALL OEMs seem to think that’s what we want.
> Lots of important things suffer when you reduce the size of the box. You
> have less knobs, more menu adjustable items, smaller loud speaker, smaller
> S-Meter, coils are smaller (lower Q), heat sinks are smaller and fans are
> smaller so you have more noise. Less room for working on the radio, less
> room for back panel jacks (so we must use plugs with 75 pins!). DON’T NEED
> ANY OF THIS. I NEED THE FOLLOWING…
> 
> 2) Larger knobs. Concentric knobs are only ok if they are large
> enough.
> 
> 3) Larger S-meter. Prefer a true meter, but if not, then at least a
> color-coded LED meter.
> 
> 4) ¼ inch connections for things like key and headphones; 
> 
> 5) Separate jacks for paddle and straight key
> 
> 6) PTT and AMP KEY should be RCA Phono (again)
> 
> 7) Dedicated RIT control (not the multi-knob)
> 
> 8) Simplified VFO mode (i.e. getting in and out of split)
> 
> 9) Buttons should have a max of dual function. Push once to enable
> main function, push twice (quickly) to enable secondary function. I don’t
> want to push multiple buttons that may be on opposite sides of the front
> panel.
> 
> 10) Exception to menu handling is allowed but only for things that really
> are “set once and forget”, such as defining filter slots and screen color.
> 
> 11) Mic gain and CW Speed should be a dedicated knob. I’m OK with it just
> being one knob, but others might prefer concentric.
> 
> 12) Band stacking register. Don’t understand why it was left out.
> 
> 13) [finally] address the keying timing issues when using a non-Ten-Tec
> linear amplifier. The Pre-dit and Post-dit (hang) time must be adjustable.
> Pre-dit can be inside the “set once and forget” menu, but Post-dit is a
> value I change often. Either make it easy to adjust, OR make it dynamically
> linked to the keyer speed with user adjustable ratio. There are keyers on
> the market that have this feature.
> 
> 14) IF output to the real panel. Can be an option, but just plug one
> cable.
> 
> 15) Pre-selector output to the real panel. Can be an option, but just 2
> cables.
> 
> 16) AUX-RX ANT connection. It’s to the point now that often the low bands
> are only usable with some kind of special small receiving antenna, due to
> all the noise from consumer products.
> 
> 17) NO BAND SCOPE. (Use the IF connector on the rear panel). Or use an
> ANT OUT, an external SDR, and Carl’s NP4Y software.
> 
> 18) Power Out indicator (not just an ALC LED)
> 
> 19) What else?
> 
> 20) Bright Red-Orange Dot! ;-)
> 
> 
> 
> I’m sure I have forgotten a few points, but mainly KEEP IT SIMPLE so that
> old eyes and old fingers can use it.
> 
> 
> 
> I intentionally began this thread here rather than in the Eagle group
> because maybe if we get these changes, some of the people here (and not
> currently in the Eagle group) will join us.
> 
> 
> 
> PIMP MY EAGLE!
> 
> 
> 
> 73 - Rick, DJ0IP
> 
> (Nr. Frankfurt, Germany)
> 
> 
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
<Prev in Thread] Current Thread [Next in Thread>