TenTec
[Top] [All Lists]

Re: [TenTec] OT: Question to the group -tuner and dipoles

To: tentec@contesting.com
Subject: Re: [TenTec] OT: Question to the group -tuner and dipoles
From: Stuart Rohre <rohre@arlut.utexas.edu>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 18 Jul 2016 15:08:25 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
There is at least one internet project with photos of a double PI net balanced tuner, which should work quite well. It uses copper tubing for two large inductors and transmitting sized variable capacitors.

The 135 foot wire or a close to that length dipole will work close to the ground for NVIS. Feed it with 450 ohm or 600 ohm open wire line for all band use.

Working at 1/8 wave above soil, brings as signal to noise gain, in that "skip static" from Summer thunderstorms is greatly attenuated or not picked up at all.

NVIS brought back 80m to usefulness for Field Days due to the reduced noise floor when the antenna was 5 to 6 feet off ground with a reflector at grass top level. (after mowing).

-Stuart Rohre
K5KVH
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>