Topband
[Top] [All Lists]

Re: Topband: Receivers, Noise Blankers and Key Clicks

To: Topband@contesting.com
Subject: Re: Topband: Receivers, Noise Blankers and Key Clicks
From: Sinisa Hristov <shristov@ptt.yu>
Date: Thu, 05 Feb 2004 06:53:17 -0500
List-post: <mailto:topband@contesting.com>
Pete Smith wrote:
 
> So then if I don't ever use the blanker, and have both the A and B gains
> set to zero, I don't need to mess with R2046 at all?  That would be a
> relief, because I was about to do the combined key click/NB mod on my Mark
> V, and didn't really like the idea of removing the SMD R2046 from the PC 
> board.


On my MkV setting A/B gain to minimum was not enough.
This probably depends on individual transistor characteristcs.
Safe way is to do the mod.


73,

Sinisa  YT1NT, VA3TTN
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband

<Prev in Thread] Current Thread [Next in Thread>