To: | <towertalk@contesting.com> |
---|---|
Subject: | [TowerTalk] Reality Check |
From: | ae4mr@arrl.org (Dave Armbrust) |
Date: | Fri, 19 Jan 2001 14:34:08 -0500 |
> -----Original Message----- > Stainless is a rather soft material and I would avoid it for structural > stresses. If you are able to locate stainless structural tube, the same > source must also have access to other types of tubing? If they do have access to other types of tubing they it is likely to not be galvanized. You would then have to find some one to hot dip galvanize the tubing unless you go with aluminum which is even softer then stainless. 73-- Dave Armbrust - AE4MR -- FAQ on WWW: http://www.contesting.com/FAQ/towertalk Submissions: towertalk@contesting.com Administrative requests: towertalk-REQUEST@contesting.com Problems: owner-towertalk@contesting.com |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [TowerTalk] Problem W/First Call Communications, Dave |
---|---|
Next by Date: | [TowerTalk] Tri-Ex, Firstcallcom@aol.com |
Previous by Thread: | [TowerTalk] Reality Check, Mike McCarthy, W1NR |
Next by Thread: | [TowerTalk] Reality Check, Pete Smith |
Indexes: | [Date] [Thread] [Top] [All Lists] |