Most any structural shape you care to name is available as "pultruded"
fiberglass reinforced plastic. A notable tradename is Extren. Lots of grades
for various purposes. Structurally, think of it as aluminum.. it's about
the same cost and strength, but about twice as flexible. There's a special
epoxy that you use to bond it, sold by the same metal dealers that sell the
stuff.
As for towers made out of composites, I suspect that a call to the mfr of
Extren (Ryland?) would turn up folks who make assemblies. There's also
structural fiberglass tubing in a variety of sizes and wall thicknesses.
I've used a lot of Extren building high voltage equipment. Easy to work
with, except for all the usual composite problems (steel blades go dull
instantly, little itchy fibers everywhere, etc.)
----- Original Message -----
From: "Dave Christensen" <Dave.Christensen@sesincusa.com>
To: <towertalk@contesting.com>
Sent: Wednesday, November 12, 2003 2:36 PM
Subject: [TowerTalk] Non-metallic towers and guy wires
> Does anyone know of a non-metallic tower or guy wire manufacturer. I would
> like to buy or build a 60 foot tower using composites.
>
>
>
> Dave Christensen
> Select Engineering Services
> 801 399-1858 x 211 office
> 801 721-9269 mobile
> 801 399-1863 FAX
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|