I believe the single point ground is to hold all equipment grounds at a
common potential; so that there is no potential or voltage between any
two component grounds. Short and minimally inductive conductors from
equipment to that single point minimize that potential difference.
Equipment grounds and the single point ground must not be connected to
the system neutral, except at the service entrance and at the power
company equipment. There must be no path between system neutral and
ground anywhere else.
73 de Red, WOØW
Gary Schafer wrote:
>With single point grounding for the antenna / power system the idea is
>to not have ground paths through any equipment to ground.
>
>73
>Gary K4FMX
>
>
>
>
>
>
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|