Towertalk
[Top] [All Lists]

Re: [TowerTalk] Tower Installation

To: towertalk@contesting.com, rtnmi@sbcglobal.net
Subject: Re: [TowerTalk] Tower Installation
From: K7LXC@aol.com
Date: Tue, 21 Aug 2007 15:42:20 EDT
List-post: <mailto:towertalk@contesting.com>
 
In a message dated 8/11/2007 7:59:58 P.M. Pacific Daylight Time,  
towertalk-request@contesting.com writes:

>  Right now all I have are 7' "T" posts (they are used for  fencing 
normally) and was thinking about using three of them embedded  in
the concrete with about 4 feet sticking up out of the concrete and tying  the 
tower legs off to them, sort of using the "T" posts as
base  anchors.

You mean they'll be standing  vertically? In that case, absolutely not. They 
don't have any appreciable  strength and will be the weak link in the system.
 
    Round pipes in general are not  suitable unless they're 6" well casing or 
something similarly brute. A  much better choice of material is H-beam with 
6" or so flanges. For tall tower  use, there is usually a flat plate welded on 
the bottom at a right angle to  the tower to provide more material surface 
area. And it doesn't hurt to  back-guy the thing.
 
Cheers,
Steve     K7LXC
TOWER TECH 



 



************************************** Get a sneak peek of the all-new AOL at 
http://discover.aol.com/memed/aolcom30tour
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>