-----Original Message-----
>From: Scott McClements <kc2pih@gmail.com>
>Sent: May 29, 2008 8:16 AM
>To: TOWERTALK@contesting.com
>Subject: Re: [TowerTalk] tower ground question
>
>On 5/29/08, David Gilbert <xdavid@cis-broadband.com> wrote:
>> That's why Cadweld connections should be used to bond to the rebar, and
>> it isn't any more difficult to do that than to bond the ground wires to
>> ground stakes. I bought the mold and materials to do so on eBay for
>> less than $30.
>
>I noticed on your installation, best I can tell, you used wire ties on
>the rebar. Is the tower bonded to all the rebar pieces?
>From an electrical code standpoint, wireties are acceptable for connecting the
>parts of the rebar together. There's no requirement for welding, for example.
Jim, W6RMK
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|