Towertalk
[Top] [All Lists]

Re: [TowerTalk] Electric Drill to Winch Adapter Question

To: K7LXC@aol.com
Subject: Re: [TowerTalk] Electric Drill to Winch Adapter Question
From: "Rick Karlquist" <richard@karlquist.com>
Reply-to: richard@karlquist.com
Date: Tue, 10 Mar 2009 10:54:47 -0700 (PDT)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
K7LXC@aol.com wrote:
>>  another heads up, I have been comparing and agonizing for  several
> Lion  Screwdriver (SID144-A CPC) which is not a drill but is an impact
> screwdriver..  1,265 inlbs of torque!  uses snap chuck drill  bits

This is completely unsuitable for operating a winch.  It will tear
up the mechanism, being an impact driver.  The RPM is way too high.

Rick N6RK

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>