On 4/21/2012 6:17 PM, Dick wrote:
> I just got a rope over a tree after 4 years of trying. I need a dipole center
> insulator that has strain relief for the coax. To clear the branches, the
> coax will be pulling against the center support rope. All the center
> insulators I've seen have an SO-239, it doesn't seem like putting that strain
> on a PL-259 is a good idea... Do any have a strain relief??
This is not center supported, but it does support the coax and current
balun from the feed point.
The ends of the wire need a little trimming but this is what I have:
http://www.rogerhalstead.com/ham_files/AntennaFeed1.htm 5 #31 cores and
6 turns of Davis BuryFlex(TM)
73
Roger (K8RI)
>
> Thank,
> Dick NY1E
> www.ny1e.com
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|