I would think BeesWax would attract Bees, or am I nuts ??
73, Dick, W1KSZ
On Thu, Sep 12, 2013 at 3:15 PM, Roger (K8RI) on TT <
K8RI-on-TowerTalk@tm.net> wrote:
> On 9/12/2013 4:53 PM, K7LXC@aol.com wrote:
>
>> Remigio, the engineer at US Tower, told me to use beeswax.
>>>
>> Guys --
>> The reason he mentions that is because that's what the assemblers
>> use
>> in order to make the sections slide back and forth when they're building
>> the tower. And the tower is HORIZONTAL.
>> As far as putting something on the legs, I don't see as it's
>> necessary
>> and at the worst it's dangerous because the tower needs to be extended in
>> order to apply the beeswax.
>> I don't see any compelling reason to lube the legs. If you do, the
>> lubricant is going to rub off in a couple of up/down cycles anyway. Then
>> what?
>> If your crank-up is making noise when it's moving, it's mostly
>> unlubricated cables rubbing. After an application of cable lube (e.g.
>> PreLube
>> available from championradio.com), the tower will make very little
>> noise - even
>> if nothing is done to the legs.
>> Cheers,
>> Steve K7LXC
>> TOWER TECH -
>> Professional tower services for amateurs
>> and
>> UST factory authorized installer
>>
>>
>>
>> ______________________________**_________________
>>
>>
>>
>> ______________________________**_________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/**mailman/listinfo/towertalk<http://lists.contesting.com/mailman/listinfo/towertalk>
>>
>
>
> ______________________________**_________________
>
>
>
> ______________________________**_________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/**mailman/listinfo/towertalk<http://lists.contesting.com/mailman/listinfo/towertalk>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|