Towertalk
[Top] [All Lists]

Re: [TowerTalk] Crank-up Tower Lube

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] Crank-up Tower Lube
From: "John Holmes" <w9ily@comcast.net>
Date: Thu, 12 Sep 2013 10:59:34 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Bob,
What did you find as the best method of applying the beeswax? I have a block
of hardened beeswax but it's a real pain to apply, even after I soften some
of it as it re-hardens very quickly.

Thanks.

John W9ILY


> Date: Wed, 11 Sep 2013 15:58:22 -0700
> From: Bob K6UJ <k6uj@pacbell.net>
> To: "TOWERTALK@contesting.com reflector" <towertalk@contesting.com>
> Subject: Re: [TowerTalk] Crank-up Tower Lube
> 
> The discussion is about the friction between the tower sections as it is
> extended or retracted,  not about lubing the cables.
> I have a local honey supplier here in Napa Valley and I get beeswax from
> them.  The beeswax works well to mitigate the squeaking and popping as the
> tower moves up or down.
> I have tried silicone spray and it was only temporarily effective.  The
beeswax
> I apply twice a year and all is well.  I agree with the earlier comment
about
> not using oil or grease that attracts dust and dirt.
> 
> Bob
> K6UJ

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>