Towertalk
[Top] [All Lists]

Re: [TowerTalk] Yaesu G800SDX Question

To: Mike Reublin NF4L <nf4l@comcast.net>
Subject: Re: [TowerTalk] Yaesu G800SDX Question
From: Tom Nicholson <Gunsrus1942@Comcast.net>
Date: Sun, 18 May 2014 17:52:53 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Mike,

    Thank you very much. I'll send him an email.

73 Tom W1ALZ


On 5/18/2014 5:47 PM, Mike Reublin NF4L wrote:
Here's a post from a few weeks back, hope it helps.
73, Mike NF4L
============================================================
I response to the many requests, I have replacement OEM cable connectors
for Yaesu Antenna Rotors & Controllers. Yaesu models:G-450A, 650A, 800A,
SA, DXA, 1000A, SA, DXA, 2800DXA, 5500 and many more. Available are the
small rectangular ELP & R-06V, 6 pin connector for the controller and the
round metal 7 pin connectors, NJC-207-PF, -RM & -Adm, and the 6 pin,
NCS-256-P, cable/rotor. For both the cable and units. Mating connectors are
also available for making cable extensions.
I also have connectors available for use with many of the Transceiver
Antenna Auto Tune functions on the TS-50S, TS-480, TS-570, TS-590S, TS-850S
ACC4, TS-990S, TS-2000, TurboTuner, LDG K-OTT and many, many more.

Email me direct:   w3frg1 at gmail dot com

Tnx  Tom W3FRG
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
On May 18, 2014, at 3:44 PM, Tom Nicholson <Gunsrus1942@Comcast.net> wrote:


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>