I've had good service life (professionally), out of black ties made by
Panduit, or Thomas and Betts.
Anything not made with carbon black will basically disintegrate outside in a
year or so. Most of the cheapie "imports" are very questionable.
At the risk of starting another antidotal thread: white schedule 40 PVC pipe
outside suffers from the same problem. Only because it is thicker, does it
usually last a little longer. But it to will eventually dry out, get
brittle and disintegrate.
Ray, W4BYG
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Steve
London
Sent: Friday, May 30, 2014 11:16 AM
To: towertalk@contesting.com
Subject: [TowerTalk] UV resistant wire ties
This has been discussed before, but without a really satisfying answer.
Does any one have the brand and product number of a UV resistant wire tie,
proven to last many years ?
I have used many so-called UV resistant ties that are junk. OTOH, the wire
ties provided by M2 with my 6 year old 40M4LLDD have held up very well,
despite the UV-rich environment here in NM.
73,
Steve, N2IC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|