On Sat,1/31/2015 3:16 AM, Patrick Greenlee wrote:
This PVC pipe over T posts sounds like a workable solution.
That's pretty common out here in California -- someone showed it to me,
and I'm using quite successfully both for Beverages and to elevate
radials. I cut the steel to about 4 ft, stick it in the ground, drill a
hole through the top of the PVC, slide the pipe over the steel, and
ty-wrap the wire to the pipe through the hole.
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|