Towertalk
[Top] [All Lists]

Re: [TowerTalk] field-day mast anchoring question

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] field-day mast anchoring question
From: "Larry Banks" <larryb.w1dyj@verizon.net>
Date: Fri, 22 Jan 2016 11:05:56 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
We (W1HP) put up a "two-el" inverted-V. Only takes two fiberglass poles for the centers and no guys -- the wire acts as the side guys and the poles are strong enough to not need guys in the fore/aft direction. If you are not going to rotate it, why go to the trouble of a 2-el yagi? (From the Boston area we just point WSW.)

73 -- Larry -- W1DYJ



-----Original Message----- From: dw
Sent: Friday, January 22, 2016 10:31
To: towertalk@contesting.com
Subject: [TowerTalk] field-day mast anchoring question


For those familiar with the AB-621 military launcher mast units.
Lets say there was an interest in using this on a field day event, where
there is a concern that the ground is too soft to safely establish
anchors.
Is there a possibility of using concrete wall-barrier blocks bolted
together, as dead-weights to safely hold the anchors?
For example, I think I can come up with a number of 60lbs cement
wall-barrier slabs that can be bolted together for each anchor point.
If this would be a viable option, how much weight on the anchor blocks
would guarantee a safe installation?
The intent is to put up a 40 meter 2 element yagi, without a rotor, at a
height of 50 feet.

Thanks in advance.
N1BBR
--
Bw_dw@fastmail.net

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>