Jeff, if you actually want 12" wide you might have to go with a backhoe.
But the one I own and use is made by Ground Hog and it will do 12-18" deep,
about 6" wide; which I use for pipe and cable.
https://www.homedepot.com/p/Ground-Hog-18-in-5-5-HP-160cc-Gas-Walk-Behind-Trencher-T-4-HS18/206863961
Paul, W6IBU
-----Original Message-----
From: Jeff
Sent: Wednesday, November 1, 2017 2:25 PM
To: towertalk@contesting.com
Subject: [TowerTalk] trencher
I want to cut a slot in the yard about 12” wide and about 12” deep to
accommodate tower wiring here on the site. In total the runs are about 1400
foot.
Is a trencher the right tool for that job?
I have no experience with that sort of thing but the rental guy I talked too
scratched his head when I mentioned the 1400’ length and the fact the trench
was shallow. Maybe I have the wrong rental place. Or maybe this is better
a job for a mini excavator?
73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|