Towertalk
[Top] [All Lists]

Re: [TowerTalk] Square Hole or Round Hole for Self Supporter?

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] Square Hole or Round Hole for Self Supporter?
From: <john@kk9a.com>
Date: Sun, 21 Jan 2018 09:07:59 -0500
List-post: <mailto:towertalk@contesting.com>
This is a great price for a backhoe op. I agree, I would not hire someone to
do a job and also take responsibly for their drill bit, that risk should be
included in their bid. I have often had trouble finding someone to dig holes
for me and I found it easier just to rent a backhoe and dig it myself. They
are not difficult to operate.

John KK9A

From:   Patrick Greenlee
Date:   Sun, 21 Jan 2018 07:47:05 -0600

Matt, Drillers who will come out in rural south central Oklahoma aren't in
good supply.  I searched a lot and found two.  Best deal of the two for a 5
ft diameter hole 8 ft deep was $2000 and I was responsible if they broke a
tooth and I was responsible for a commercial tow rig in case they got stuck.

I knew they wouldn't get stuck but I have no experience re breaking teeth on
their machine so I was a tad leery and used a local "dirt contractor" who
charged $80 to dig my hole with a backhoe.

How does $2000 for 5 ft diameter 8 ft deep compare to your experiences? This
was for digging through clay, sandy clay and maybe some soft sand rock.
Sand rock is a local name for a type of sand stone that crumbles by hand
strength alone and digs pretty easy with backhoe.

Patrick        NJ5G

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>