Hi Dave,
I make my own dipole center connectors. I use black cutting boards from a
kitchen supply store. They are about 12" X 8" X3/8". I think they are
polypropolene easy to cut and drill. Mine are triangles about 6" on a
side with holes in each corner and a so259 about in the middle. I use black
zip ties to hold coax tension from socket. The black cutting board and
black zip ties hold up very good in the sun.. Mine have been up about 10
years. Copper wire has been changed several times but the boards are like
new.
Good luck es 73
Joe K2UF
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Dave
Thompson
Sent: Thursday, July 22, 2021 1:53 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Dipole center connector
I am looking for a better dipole center connector better than the Budwig.
Any ideas?
The Budwig can pull apart.
73 Dave K4JRB
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|