AJ4LU and I used one for several run and gun rover ops, covering 20+ grids at
70 MPH. We even turned it in motion with no issues other than mounting it
backwards the first time!
73, Drew KO4MA
Sent from my iPad
> On Oct 29, 2014, at 8:59 PM, Jarred Jackson <jarred.jackson@hotmail.com>
> wrote:
>
> I have a 3 element yagi for 6m, but it seems a bit too much for me to take
> out on the rover for contests. So in May I ordered a 6m loop from KU4AB using
> the website. After months of waiting, a phone call, and several emails, I
> gave up and consider my $87 lost. But this provided the opportunity to look
> into other antennas and came across the PAR Moxon. The company was very
> responsive and the antenna performs nearly as well as my yagi. Its a bit
> bigger than the loop might have been, but it fits just fine on the rover mast
> and has some gain. I have not yet experienced 60mph highway speeds. If anyone
> has any experience with the PAR 6m Moxon in a rover application I would like
> to know if it holds up or if I should take the wire and side "sticks" off
> while traveling.
>
> Jarred - KF2MR
>
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|