Guess that could be a possibility in some cases if you had a LPT port for
keying and also hd printers installed on the same port. Some printer
packages are pretty agressive.
----- Original Message -----
From: "Barry " <w2up@mindspring.com>
To: <writelog@contesting.com>
Sent: Tuesday, May 28, 2002 18:02
Subject: Re: AW: [WriteLog] Erratic CW
> Carsten brings up an interesting point. I don't have problems with CW
> keying, even with a P-133, after closing all the misc. background
> programs. I use a COM port, not LPT port for keying. I wonder if that is
> the answer. Anyone having the problems with COM port keying?
> Barry W2UP
>
> On 28 May 2002 Carsten Steinhöfel wrote:
>
> > > ...
> > Background processes could sure be a problem, especially the printer
etc.
> > drivers which would obviously access the LPT port as well (and with
higher
> > priority then Writelog). Have you thought about using a COM port for CW?
> > I have CW on the same port as radio control and never had erratic CW (on
> > a 400MHz machine).
> >
> > 73 Carsten, DL1EFD
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
>
> --
> Barry Kutner, W2UP Internet: w2up@mindspring.com
> Newtown, PA Frankford Radio Club
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
|