Yes, that was the "trick" I was missing.
Set "Comm PTT" to NO fixes the hanging problem completely.
Thanks Joe! I'll play around with this a bit more, but it does work.
Certainly wasn't obvious...
73, Alan AD6E // K6K/40
Date: Mon, 27 Sep 2010 00:37:02 -0400
> From: "Joe Subich, W4TV" <lists@subich.com>
> Subject: Re: [WriteLog] setup issue with microHAM
> To: writelog@contesting.com
> Message-ID: <4CA01F6E.7090503@subich.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
>
> Hanging in transmit, particularly with the K3, seems to be related
> to using both radio command for PTT and hardware PTT. Make sure you
> Set "Comm PTT" to "NO" for each radio.
>
> I've seen reports of the problem with other radios but it is most common
> in the K3. I've also seen reports of the problem with other
> software/logging programs and with other interfaces - even basic
> serial cables and simple transistor PTT/FSK drivers.
>
> 73,
>
> ... Joe, W4TV
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|