WriteLog
[Top] [All Lists]

Re: [WriteLog] CAT control for FTdx-5000 ?

To: "Magnus Aronsson" <sm6wet@telia.com>, "Joe Subich, W4TV" <lists@subich.com>, <writelog@contesting.com>
Subject: Re: [WriteLog] CAT control for FTdx-5000 ?
From: "Robert Chudek - K0RC" <k0rc@citlink.net>
Reply-to: Robert Chudek - K0RC <k0rc@citlink.net>
Date: Thu, 21 Oct 2010 17:39:54 -0500
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
I would "hard set" the Baud to a known speed (9600, 19200, etc.) on both 
ends of the serial line. I know auto-baud detection does not always work 
properly on Icom radios.

73 de Bob - KØRC in MN


----- Original Message ----- 
From: "Magnus Aronsson" <sm6wet@telia.com>
To: "Joe Subich, W4TV" <lists@subich.com>; <writelog@contesting.com>
Sent: Thursday, October 21, 2010 1:48 PM
Subject: Re: [WriteLog] CAT control for FTdx-5000 ?


> Thank you Joe but I dont get it working.
>
> I have a full serial cable. A regulad DB9 serial cable, not a null-modem.
>
> Tried setting the CAT TOT to 1000 and also 3000.
>
> Have it set on serial port 1. CW is on serial#4
>
> Rig-type Yaesu FTDX-9000
> Baud AUTO
> Poll is ticked
>
> Comm PTT is YES
>
> All mode PTT on CW port RTS is ticked, if I unclick it it sends CQ all the
> time.
>
>
> Any ideas?
>
>
> 73 de Magnus SM6WET
>
>
>
>
> ----- Original Message ----- 
> From: "Joe Subich, W4TV" <lists@subich.com>
> To: <writelog@contesting.com>
> Sent: Thursday, October 21, 2010 5:39 PM
> Subject: Re: [WriteLog] CAT control for FTdx-5000 ?
>
>
>>
>> Are you using CW/PTT on the CAT port (DTR/RTS)?
>>
>> FT-2000/5000/9000 expect RTS/CTS handshake ... you need at least
>> five wires in the serial cable (2-2, 3-3, 5-5, 7-7, 8-8).  Make
>> sure your cable supports RTS/CTS and WriteLog can provide it
>> (no CW/PTT on the CAT port).
>>
>> In addition, FT-2000/5000/9000 CAT TOT menu item should be set to
>> at least 1000 (default is 10).
>>
>> 73,
>>
>>    ... Joe, W4TV
>>
>>
>> On 10/21/2010 1:25 PM, Magnus Aronsson wrote:
>>> Hello
>>>
>>> Got my new radio today, plugged in the serial cable and tried the
>>> Ftdx-9000
>>> and the FT-2000 setting but neither work.
>>> Anyone have a 5000 who can help me get it to work?
>>>
>>> My writelog version 10.70C
>>>
>>> 73 de Magnus SM6WET
>>>
>>> _______________________________________________
>>> WriteLog mailing list
>>> WriteLog@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/writelog
>>> WriteLog on the web:  http://www.writelog.com/
>>>
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web:  http://www.writelog.com/
>
>
> --------------------------------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.862 / Virus Database: 271.1.1/3209 - Release Date: 10/20/10
> 18:34:00
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/ 

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>