WriteLog
[Top] [All Lists]

Re: [WriteLog] WriteLog 11.10 Release

To: writelog@contesting.com
Subject: Re: [WriteLog] WriteLog 11.10 Release
From: Steve AI9T <steve@ai9t.com>
Reply-to: steve@ai9t.com
Date: Sat, 30 Mar 2013 23:10:55 -0400
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Ed

I'm having the same problem even after removing the rttyrite 1 and 2 sections from the ini file. I see the xmmt.ocx in the TU Type after I restart WL. I can check it but it does not open a windows that allows me to register the file. If I pick MMTTY then close the MMTTY window and reopen the TU type is empty again.

I already had a 2 tone folder in my Ham Programs folder for N1MM. I put the XMMT.ocx file in my WL programs folder.

Steve

On 3/30/2013 10:40 PM, Ed Muns wrote:
Go into writelog.ini and delete the [Rttyrite] and [Rttyrite2] sections.
These were made with a prior version of WriteLog and may be causing the
problem.  Then open WriteLog and setup your Rttyrite window again.  The TNC
menu should have both MMTTY and XMMT.ocx items to choose from.  Choosing
MMTTY will use the MMTTY Plug-in you already have installed.  Choosing
XMMT.osx will bring up a window offering to Register xmmt.osx and asking for
the path to where you have it stored.  Once that finishes, you will have the
xmmt.osx window in which you put the path to mmtty.exe or 2tone.exe.

But before these latter steps can occur you need to do more than just
upgrade to WriteLog 11.10G.  You must store xmmt.osx wherever you choose on
your computer and also 2tone.exe plus 2tone.ini.  On Vista and later
operating systems, you probably don't want to put these 2Tone files in the
Program Files directory.  For some reason, I've found the virtual store
mechanism to seldom work with 2Tone and you want the ini file to be updated
with your configuration choices and window position.  So put them in a 2Tone
directory under Program Data or most anywhere but not Program Files which
Windows doesn't allow direct writing to.


Ed W0YK

Steve AI9T wrote:
Installed the latest version. Opened Writelog,, and right
clicked on Call entry window,, then RTTY view. RTTYrite and
MMTTY plugin window open. Then I click on TU Type and there
is nothing in the dropdown and Writelog freezes up. Have to
close via task manager.

Running windows 7 64 bit
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/


--
73

Steve AI9T

http://www.ai9t.com

AI9T DX Cluster

Version 4 AI9T   Telnet: dxc.ai9t.com port 7300
Version 6 AI9T-2 Telnet: dxc.ai9t.com port 7373 (CW + Skimmer)

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>