Yaesu
[Top] [All Lists]

[Yaesu] HT decisions

To: <yaesu@contesting.com>
Subject: [Yaesu] HT decisions
From: n9krs@ibm.net (Bob Burns N9KRS)
Date: Thu, 20 Aug 1998 19:18:08 -0500
At 8/20/98 11:48 AM, David R Jeffries wrote:

>You might consider that Yeasu  (I believe) is the only manf. that as we
>speak is offering a amateur HH with Digital PL  capabilities .  The HH is
>the FT50.

Well, I've not encountered any DPL around here. Most agencies in this area
are using VHF, either simplex or repeaters, with PL _or_ they've gone to
800MHz trunked systems. Consequently, I've got a Uniden Trunktracker
scanner on order to handle my scanning needs.

However, you raise a valid point.

I hinted at the issue of price. That may be less of an issue than I
thought. For the past year, the price differential between the FT-50 and
the FT-51 at most of the mail order ham radio stores has been around $125.
I've been hoping that the FT-51 would come down in price, especially since
the FT-50 and VX-1 have been getting a lot of attention. Well, it's finally
happened. Both AES and HRO have lowered their FT-51 prices to the point
where it is only $40 more than the FT-50.

It's going to come down to what features do I really want. That decision,
for me, has always favored the FT-51. But, until now, I've had to consider
the FT-50 because of the price difference.

As for the VX-1...I figured my remark would raise a few hackles. There is
definitely a place in the market for radios like the VX-1. The
manufacturers, Yaesu, Alinco, Standard, and Icom alike, have been wise to
respond to that market demand. But the user interface and the low power
output make it a radio that doesn't interest me.

Thanks to all for their input!

Bob...


--
FAQ on WWW:               http://www.qsl.net/k7on/yaesu.html
Submissions:              yaesu@contesting.com
Administrative requests:  yaesu-REQUEST@contesting.com
Problems:                 owner-yaesu@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>