Topband
[Top] [All Lists]

Re: Topband: WTB: Guy wire stuff

To: Carl <km1h@jeremy.mv.com>, low bad reflector <topband@contesting.com>
Subject: Re: Topband: WTB: Guy wire stuff
From: Wayne Kline <w3ea@hotmail.com>
Date: Sat, 6 Sep 2014 18:00:56 -0400
List-post: <topband@contesting.com">mailto:topband@contesting.com>
 Hi  Carl
 
   Yes it seems that  we  stumbles across the same Crew  :)   .  No not really 
but the same experience.
The   " Strand"  what they called it ran from pole to pole  or  was used as 
down guy pole wires when the 
ENG. required  it for the extra pole  line capacity.
 
   Because  I was breaking up my guys   .  I had access to all the STUMP spools 
of strand. 
These were one's that they  perceived to be  less then 200 Feet, the distance 
between  poles.
I also given a full 5000 ft. roll that was dropped and the wooden side was  
broken off.
 So they would not even TRY to  cart it for installation.  
 
 So being a Ham you never know what scrounging my turn up....
 
  And I don't want to talk about all the CATV line YIKES    
 
Wayne W3EA  . . 

 
From: km1h@jeremy.mv.
Date: Sat, 6 Sep 2014 10:30:43 -0400








Thanks for that nice report Wayne. Those are the 
same Grips Im using here.
 
I dont know about these days but when I was 
installing the 4 towers here I was informed that Rohn EHS was made in Korea as 
was just about all the utility and CATV strand. Rohn just added a premium cost 
to it.
 
When this town was cabled I got literally miles of 
left over 1/4 EHS and hardline from 1/2 to 7/8 for a couple of cases of beer. I 
used my 2 axle race car trailer to move it.  The installers had already 
been paid and dont transport but very little extra and besides their next job 
was in OH....real gypsies and higher than a kite most of the time.
 
                                          
_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>