The Rohn specs state that guy anchors must be protected with tar from the
concrete block and past where they emerge from the ground.
Mike, W1NR
> As previously stated, I believe protection all the way to the surface
> and above the surface by concrete should work as long as the total
> concrete weight and size are big enough for the job. However, if you
> scan the archives for "protective coating" you will find a K7LXC
> suggestion about protecting galvanized coatings with roofing tar or
> other preservatives. Seems logical to me.
Lyn, W4WDN
--
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|