Towertalk
[Top] [All Lists]

Re: [TowerTalk] solid THHN vs jacketed copperweld

To: [email protected]
Subject: Re: [TowerTalk] solid THHN vs jacketed copperweld
From: Jim Brown <[email protected]>
Reply-to: [email protected]
Date: Tue, 20 Sep 2022 16:04:01 -0700
List-post: <mailto:[email protected]>
Roughly 20%. And you'll loose a bit from the end that breaks where you tie it off.

73, Jim K9YC

On 9/20/2022 12:53 PM, Gary K9GS wrote:
How much stretch in feet do you see for, say 100 feet of wire before it 
breaks?73,Gary K9GS
-------- Original message --------From: Jim Brown <[email protected]> 
Date: 9/20/22  12:19 PM  (GMT-06:00) To: [email protected] Subject: Re: 
[TowerTalk] solid THHN vs jacketed copperweld On 9/20/2022 7:50 AM, Ken Alker wrote:> 
What method do you use to stretch the wire from #8 to #9?Tie one end to immovable 
object, telephone pole or big tree, other to trailer hitch. Drive VERY slowly, with 
second person watching to see when it breaks. For us, it's always near one end.73, Jim 
K9YC______________________________________________________________________________________________TowerTalk
 mailing 
[email protected]http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>