Thank you73,Gary K9GS
-------- Original message --------From: Jim Brown <jim@audiosystemsgroup.com>
Date: 9/20/22 6:04 PM (GMT-06:00) To: towertalk@contesting.com Subject: Re:
[TowerTalk] solid THHN vs jacketed copperweld Roughly 20%. And you'll loose a
bit from the end that breaks where you tie it off.73, Jim K9YCOn 9/20/2022
12:53 PM, Gary K9GS wrote:> How much stretch in feet do you see for, say 100
feet of wire before it breaks?73,Gary K9GS> -------- Original message
--------From: Jim Brown <jim@audiosystemsgroup.com> Date: 9/20/22 12:19 PM
(GMT-06:00) To: towertalk@contesting.com Subject: Re: [TowerTalk] solid THHN vs
jacketed copperweld On 9/20/2022 7:50 AM, Ken Alker wrote:> What method do you
use to stretch the wire from #8 to #9?Tie one end to immovable object,
telephone pole or big tree, other to trailer hitch. Drive VERY slowly, with
second person watching to see when it breaks. For us, it's always near one
end.73, Jim
K9YC______________________________________________________________________________________________TowerTalk
mailing
listTowerTalk@contesting.comhttp://lists.contesting.com/mailman/listinfo/towertalk>
_______________________________________________> > > >
_______________________________________________> TowerTalk mailing list>
TowerTalk@contesting.com>
http://lists.contesting.com/mailman/listinfo/towertalk______________________________________________________________________________________________TowerTalk
mailing
listTowerTalk@contesting.comhttp://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|