NO WAY
To do so you have to modify the pi-net, as the output impedance of the tube
will be much higher
73
Peter
-----Original Message-----
From: DF3KV <df3kv@t-online.de>
To: amps@contesting.com
Sent: Sat, Aug 29, 2009 12:56 pm
Subject: Re: [Amps] SB-220 bias question
To do so you have to modify the pi-net, as the output impedance of the tube
will be much higher
73
Peter
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
My whole point is to run the tubes at higher plate voltage with less plarte
and grid current for the same power output
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|