OK, I'll get in here on this one too!
All morning I have been on 20 working dx net etc.
I had interference on both the upper and lower side AT DIFFERENT TIMES.
I like the way the 'HIGH CUT' and 'LOW CUT' work, and I find it very usefull.
Like some have already said the issue is when I'm done with the 'CUT' whether
it helped or not, I WANT TO GO BACK TO THE SAME BW and PBT setting I had
before I touched the 'CUT' button.
So to implement the change TT would need to 'REMEMBER' where the BW and PBT
is, then when I move the 'CUT' keep those settings so when I reset 'CUT' it
goes back there.
To me this is a big thing, this AM during my testing / operations, I had to
reset the BW and PBT MANY TIMES after using the 'Cut"
If it is technically possible I would love to see this change implemented.
Lee, KC9CDT
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|