Towertalk
[Top] [All Lists]

Re: [TowerTalk] Cutting Aluminum

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Cutting Aluminum
From: Phil Snyder <n9lah@comcast.net>
Date: Sat, 08 Dec 2007 14:33:17 -0600
List-post: <mailto:towertalk@contesting.com>
Fred, when you say you have to make 1/32 to 1/16 deep passes, what type 
of saw? Table, or maybe a radial arm saw?

Phil
N9LAH

Frederick M. Mott wrote:
> Many years ago I bought a 10 inch Craftsman carbide tip blade for Aluminum
> from Sears and I have used it making rack panels and also cutting Aluminum
> tubing and aluminum bars for many ham projects.  The blade is very similar
> to a fine cutting carbide tip blade for wood, which I have used for 1/8
> Aluminum sheets.  To cut 1/2 inch X 2 inch aluminum you have to cut at a
> 1/32 to 1/16 depth at each pass.  The end result, if you are careful is a
> nice clean cut that needs to be slightly filed and sanded for the
> professional look.  Fred AB8AH  
>
> ORIGINAL MESSAGE:
>
> On Fri, 07 Dec 2007 23:32:32 -0800, "Richard (Rick) Karlquist"
> <richard@karlquist.com> wrote:
>
>   
>> Are you talking about an abrasive type blade?
>> Those are only for steel, not aluminum.
>>
>> Rick N6RK
>>     
>
> ------------ REPLY FOLLOWS ------------
>
> Really? I have used an abrasive blade on my table saw to cut aluminum
> for years with no problem, but that does not mean it is the best
> choice. Please tell me why it is not recommended and what would be the
> best blade.
>
> Thanks,
>
> 73, Bill W6WRT
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>   
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>