Amps
[Top] [All Lists]

[AMPS] 4CX15000 Amp.????

To: <amps@contesting.com>
Subject: [AMPS] 4CX15000 Amp.????
From: measures@vc.net (Rich Measures)
Date: Fri, 18 Apr 97 16:11:16 -0800
Bob proposed:
> No tube or tubes shall be used in any
>RF amp.that has a total plate dissipation rating not to exceed 1500
>watts.
A 4E27 pentode is rated at 65w of anode/plate dissipation.  The 
filament/cathode consumes 7.5a at 5V.  The emissive capability is about 
190mA in linear service..  A total anode dissipation rating "not to 
exceed 1500-watts" would allow the use of (23) 4E27s in parallel.  The 
Zout would be 560 ohms.  With an anode supply of 4kV and transverse 
forced air cooling, a 4E27 can produce 450w pep in SSB-voice, Class AB2 
g-g linear amplifier service.  .  Hmmmm.  That's over 10,000w output, 
Bob.   We already have a problem with holes in the ozone layer.  With 
amateur radio operators using that much suds, holes could be burned clean 
through the ether.  
Rich---

R. L. Measures, 805-386-3734, AG6K   



--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com

<Prev in Thread] Current Thread [Next in Thread>