Amps
[Top] [All Lists]

[AMPS] SB-220: Operate/Standby Switch

To: <amps@contesting.com>
Subject: [AMPS] SB-220: Operate/Standby Switch
From: 2@vc.net (measures)
Date: Fri, 2 Feb 2001 01:28:02 -0800
>
>If you can adjust driving power to obtain the desired out, the CW 
>position becomes basically meaningless, expecially if considering that 
>tubes work better at 3Kv plate voltage.

CW has c. 2x the duty-cycle of SSB.  The SB-220's HV transformer is too 
light for CW on the SSB tap.  The same thing is true for the TL-922.  

ciao, Mauri.

-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>